show traffic_segmentation
Used to display the current traffic segmentation table.
Purpose
Syntax
show traffic_segmentation {<portlist>}
Description
This command displays the current traffic segmentation table.
Parameters
<portlist> – Specifes a range of ports to be displayed. If no parameter is specified, the
system will display all current traffic segmentation tables.
Restrictions
None.
Usage Example:
To display the traffic segmentation table:
DGS-3224TGR:4# show traffic_segmentation 1-3
Command: show traffic_segmentation 1-3
Traffic Segmentation Table
Port
--------
1
2
3
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Forward Portlist
------------------------------------------------------------------------------
11-15
11-15
11-15
159