D-Link DGS-3224TGR Command Line Interface Reference Manual page 110

Example Usage:
To configure 802.1x reauthentication for ports 15-18:
config radius add
Used to configure the settings the switch will use to communicate with a RADIUS server.
Purpose
Syntax config radius <server_index 1-3> {ipaddress <server_ip>| key <passwd 32> | auth_port
<udp_port_number 1-65535>| acct_port <udp_port_number 1-65535>}
The config radius add command is used to configure the settings the switch will use to
Description
communicate with a RADIUS server.
<server_index 1-3> − Assigns a number to the current set of RADIUS server settings. Up to
Parameters
three groups of RADIUS server settings can be entered on the switch.
ipaddress <server_ip> − The IP address of the RADIUS server.
key − Specifies that a password and encryption key will be used between the switch and the
RADIUS server.
<passwd 32> − The shared-secret key used by the RADIUS server and the switch. Up to 32
characters can be used.
auth_port <udp_port_number 1-65535> − The UDP port number for authentication requests.
The default is 1812.
acct_port <udp_port_number 1-65535> − The UDP port number for accounting requests.
The default is 1813.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To configure RADIUS server communication settings:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
config 802.1x reauth port_based 15-18
DGS-3224TGR:4#
Command: config 802.1x reauth port_based 15-18
Success.
DGS-3224TGR:4#
config radius add 1 10.48.74.121 key dlink default
DGS-3224TGR:4#
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DGS-3224TGR:4#
106