D-Link DGS-3224TGR Command Line Interface Reference Manual page 112

show radius
Purpose Used to display the current RADIUS configurations on the switch.
Syntax show radius
The show radius command is used to display the current RADIUS configurations on the
Description
switch.
Parameters None.
Restrictions None.
Example Usage:
To display RADIUS settings on the switch:
show 802.1x user
Purpose Used to display the current configuration of the 802.1x server on the switch.
Syntax show 802.1x user
The show 802.1x user command is used to display the current configuration of the
Description
802.1x Port-based Network Access Control server application on the switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To show the 802.1x user:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
config radius add 1 10.48.74.121 key dlink default
DGS-3224TGR:4#
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DGS-3224TGR:4#
DGS-3224TGR:4#show radius
Command: show radius
Index IP Address
----- ------------------
1 10.1.1.1
2 20.1.1.1
3 30.1.1.1
Total Entries : 3
DGS-3224TGR:4#
Auth-Port Acct-Port
Number Number
--------- ---------
1812 1813
1800 1813
1812 1813
108
Status Key
----------- ------------
Active switch
Active dgs324
Active dlink