D-Link DGS-3224TGR Command Line Interface Reference Manual page 114

show auth_statistics
Used to display the switch's authentication statistics.
Purpose
Syntax show auth_statistics {ports <portlist>}
Description The show auth_statistics command is used to display authentication statistics.
ports <portlist> − Specifies a range of ports. The port list is specified by listing the beginning
Parameters
port number and the highest port number of the range. The beginning and end of the port list
range are separated by a dash. For example, 3 would specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and port 4 − in numerical order.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To display authentication statistics:
DGS-3224TGR:4#show auth_statistics
Command: show auth_statistics
Port number : 1
EapolFramesRx
EapolFramesTx
EapolStartFramesRx
EapolReqIDFramesTx
EapolLogoffFramesRx
EapolReqFramesTx
EapolRespIdFramesRx
EapolRespFramesRx
InvalidEapolFramesRx
EapLengthErrorFramesRx
LastEapolFrameVersion
LastEapolFrameSource
CTRL+C ESC q
show auth_diagnostics
Used to display the switch's authentication diagnostics statistics.
Purpose
Syntax show auth_diagnostics {ports <portlist>}
Description The show auth_diagnostics command is used to display authentication diagnostics statistics.
Parameters ports <portlist> − Specifies a range of ports. The port list is specified by listing the beginning
port number and the highest port number of the range. The beginning and end of the port list
range are separated by a dash. For example, 3 would specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and port 4 − in numerical order.
Restrictions None.
Example Usage:
To display authentication diagnostics statistics:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Quit SPACE n
0
0
0
0
0
0
0
0
0
0
0
00-00-00-00-00-00
Next Page p Previous Page
110
r Refresh