D-Link DGS-3224TGR Command Line Interface Reference Manual page 18

DGS-3224TGR:4#sh sw
Command: show switch
Device Type
MAC Address
IP Address
VLAN Name
Subnet Mask
Default Gateway
Boot PROM Version: Build 0.01.004
Firmware Version
Hardware Version
System Name
System Location
System Contact
Spanning Tree
GVRP
IGMP Snooping
TELNET
SSH
WEB
RMON
RPS State
DGS-3224TGR:4#
show serial_port
Used to display the current serial port settings.
Purpose
Syntax show serial_port
Description This command displays the current serial port settings.
Parameters None.
Restrictions None
Example Usage:
To display the serial port setting:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
: DGS-3224TGR Gigabit-Ethernet Switch
: 00-01-02-03-04-00
: 10.90.90.90 (Manual)
: default
: 255.0.0.0
: 0.0.0.0
: Build 0.03.018
: 2A1
:
:
:
: Disabled
: Disabled
: Disabled
: Enabled(TCP 23)
: Enabled(TCP 22)
: Enabled(TCP 80)
: Disabled
: Inactive
DGS-3224TGR:4#show serial_port
Command: show serial_port
Baud Rate : 9600
Data Bits : 8
Parity Bits : None
Stop Bits : 1
Auto-Logout : 10 mins
DGS-3224TGR:4#
14