D-Link DGS-3224TGR Command Line Interface Reference Manual page 24

save
Used to save changes in the switch's configuration to non-volatile RAM.
Purpose
Syntax save
Description This command is used to enter the current switch configuration into non-volatile RAM. The
saved switch configuration will be loaded into the switch's memory each time the switch is
restarted.
None.
Parameters
Only administrator-level users can issue this command.
Restrictions
Example Usage:
To save the switch's current configuration to non-volatile RAM:
DGS-3224TGR:4#save
Command: save
Saving all settings to NV-RAM... 100%
done.
DGS-3224TGR:4#
reboot
Purpose Used to restart the switch.
Syntax reboot
This command is used to restart the switch.
Description
None.
Parameters
Restrictions Only administrator-level users can issue this command.
Example Usage:
To restart the switch:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#reboot
Command: reboot
Are you sure want to proceed with the system reboot?
(y|n)
Please wait, the switch is rebooting...
20