D-Link DGS-3224TGR Command Line Interface Reference Manual page 93

DGS-3224TGR:4#config ipif System ipaddress 10.48.74.122/8
Command: config ipif System ipaddress 10.48.74.122/8
Success.
DGS-3224TGR:4#
show ipif
Purpose Used to display the configuration of an IP interface on the switch.
Syntax show ipif {<ipif_name 12>}
This command will display the configuration of an IP interface on the switch.
Description
<ipif_name> − The name of the IP interface you want to show.
Parameters
Restrictions None.
Example Usage:
To display IP interface settings:
DGS-3224TGR:4#show ipif System
Command: show ipif System
IP Interface Settings
Interface Name : System
IP Address
Subnet Mask
VLAN Name
Admin. State
Link Status
Member Ports
Total Entries
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
: 10.48.74.122
: 255.0.0.0
: default
: Enabled
: Link UP
: 1-24
: 1
(MANUAL)
89