D-Link DGS-3224TGR Command Line Interface Reference Manual page 35

config snmp system_location
Used to enter a description of the location of the switch.
Purpose
Syntax config snmp system_location <sw_location>
Description This command is used to enter a description of the location of the switch. A maximum of 128
characters can be used.
<sw_location> − A description of the location of the switch. A maximum of 128 characters
Parameters
can be used.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To configure the switch location for "Timbuktu":
.
DGS-3224TGR:4#config snmp system_location Timbuktu
Command: config snmp system_location Timbuktu
Success.
DGS-3224TGR:4#
config snmp system_contact
Used to enter the name of a contact person who is responsible for the switch.
Purpose
Syntax config snmp system_contact <sw_contact>
Description This command is used to enter the name and|or other information to identify a contact
person who is responsible for the switch. A maximum of 128 character can be used.
Parameters <sw_contact> − A maximum of 128 characters used to identify a contact person who is
responsible for the switch.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To configure the switch contact to "dlink":
.
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#config snmp system_contact dlink
Command: config snmp system_contact dlink
Success.
DGS-3224TGR:4#
31