D-Link DGS-3224TGR Command Line Interface Reference Manual page 23

enable web
Used to enable the HTTP-based management software on the switch.
Purpose
Syntax enable web <tcp_port_number>
Description This command is used to enable the Web-based management software on the switch. The
user can specify the TCP port number the switch will use to listen for Telnet requests.
<tcp_port_number> − The TCP port number. TCP ports are numbered between 1 and
Parameters
65,535. The "well-known" port for the Web-based management software is 80.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To enable HTTP and configure port number:
DGS-3224TGR:4#enable web 80
Command: enable web 80
Success.
DGS-3224TGR:4#
disable web
Purpose Used to disable the HTTP-based management software on the switch.
Syntax disable web
Description This command disables the Web-based management software on the switch.
None.
Parameters
Only administrator-level users can issue this command.
Restrictions
Example Usage:
To disable HTTP:
DGS-3224TGR:4#disable web
Command: disable web
Success.
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
19