D-Link DGS-3224TGR Command Line Interface Reference Manual page 83

DGS-3224TGR:4#disable gvrp
Command: disable gvrp
Success.
DGS-3224TGR:4#
show vlan
Purpose Used to display the current VLAN configuration on the switch
Syntax show vlan {<vlan_name 32>}
Description This command displays summary information about each VLAN including the VLAN ID, VLAN
name, the Tagging/Untagging status, and the Member/Non-member/Forbidden status of each
port that is a member of the VLAN.
<vlan_name 32> − The VLAN name of the VLAN for which you want to display a summary of
Parameters
settings.
None.
Restrictions
Example Usage:
To display VLAN settings:
DGS-3224TGR:4#show vlan
Command: show vlan
VID
VLAN TYPE
Member ports
Untagged ports : 1-23
Forbidden ports :
Total Entries
DGS-3224TGR:4#
show gvrp
Used to display the GVRP status for a port list on the switch.
Purpose
Syntax show gvrp {<portlist>}
This command displays the PVID/GVRP state/ingress checking state of each port on the
Description
switch.
<portlist> − Specifies a range of ports for which the GVRP status is to be displayed. The port
Parameters
list is specified by listing the beginning port number and the highest port number of the
range. The beginning and end of the port list range are separated by a dash. For example, 3
would specify port 3. 4 specifies port 4. 3-4 specifies all of the ports port 3 and port 4 − in
numerical order.
None.
Restrictions
Example Usage:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
: 1
: static
: 1-24
Static ports : 1-24
: 1
VLAN Name : default
Advertisement : Enabled
79