D-Link DGS-3224TGR Command Line Interface Reference Manual page 131

config ssh authmode
Purpose Used to configure the SSH authentication mode setting.
Syntax config ssh authmode [password |publickey|hostbased] [enable|disable]
This command will allow you to configure the SSH authentication mode.
Description
[password |publickey|hostbased] – Choose the desired SSH authentication mode.
Parameters
[enable|disable] – This allows you to enable or disable SSH authentication.
Only administrator-level users can issue this command.
Restrictions
Usage Example:
To display the SSH algorithm:
DGS-3224TGR:4#show ssh algorithm
Command: show ssh algorithm
Encryption Algorithm
MD5
SHA1
DSA
RSA
3DES
Blowfish
DGS-3224TGR:4#
show ssh authmode
Purpose Used to display the SSH authentication mode setting.
Syntax show ssh authmode
Description This command will allow you to display the current SSH authentication mode.
None.
Parameters
None.
Restrictions
Usage Example:
To display the SSH authmode:
DGS-3224TGR:4#show ssh authmode
Command: show ssh authmode
Authentication Algorithm
Hostbased : Enabled
Password : Enabled
Publickey : Enabled
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
127