D-Link DGS-3224TGR Command Line Interface Reference Manual page 66

DGS-3224TGR:4# show scheduling
Command: show scheduling
QOS Output Scheduling
Class ID
-------------
Class-0
Class-1
Class-2
Class-3
Class-4
Class-5
Class-6
Class-7
DGS-3224TGR:4#
config scheduling_mechanism
Purpose Used to configure the traffic scheduling mechanism for each COS queue.
Syntax config scheduling_mechanism [strict|weight_fair]
This command is use to specify how the switch handle packets in priority queues.
Description
strict − The highest queue is the first to process traffic. That is, the highest queue should be
Parameters
finished at first.
weight_fair − Use the weight fair algorithm to handle packets in priority queues.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To configure the traffic scheduling mechanism for each COS queue:
DGS-3224TGR:4# config scheduling_mechanism strict
Command: config scheduling_mechanism strict
Success.
DGS-3224TGR:4#
show scheduling_mechanism
Purpose
Syntax
Description
Parameters
Restrictions
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
MAX. Weight
------------------
1
2
3
4
5
6
7
8
Used to display the current traffic scheduling mechanisms in use on the switch.
show scheduling_mechanism
This command will display the current traffic scheduling mechanisms in use on the switch.
None.
None.
62