D-Link DGS-3224TGR Command Line Interface Reference Manual page 130

config ssh algorithm
Purpose Used to configure the SSH algorithm.
Syntax config ssh algorithm [3DES|Blowfish|MD5|SHA1|DSA|RSA] [enable|disable]
This command allows you to configure the desired type of SSH algorithm.
Description
[3DES|Blowfish|MD5|SHA1|DSA|RSA] – Choose the desired security algorithm.
Parameters
[enable|disable] – This allows you to enable or disable the SSH algorithm.
Only administrator-level users can issue this command.
Restrictions
Usage Example:
To configure SSH algorithm:
DGS-3224TGR:4#config ssh algorithm Blowfish enable
Command: show ssh algorithm Blowfish enable
Success.
DGS-3224TGR:4#
show ssh algorithm
Used to display the SSH algorithm setting.
Purpose
Syntax show ssh algorithm
Description This command will display the current SSH algorithm setting status.
Parameters None.
None.
Restrictions
Usage Example:
To display the SSH algorithm:
DGS-3224TGR:4#show ssh algorithm
Command: show ssh algorithm
Encryption Algorithm:
3DES
Blowfish
MD5
SHA
RSA
DSA
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
: Enable
: Enable
: Enable
: Enable
: Enable
: Enable
126