D-Link DGS-3224TGR Command Line Interface Reference Manual page 100

show igmp_snooping group
Purpose Used to display the current IGMP snooping group configuration on the switch.
Syntax show igmp_snooping group {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping group configuration on the swtich.
<vlan_name 32> − The name of the VLAN for which you want to view IGMP snooping group
Parameters
configuration information.
Restrictions None.
Example Usage:
To show IGMP snooping group:
DGS-3224TGR:4#show igmp_snooping group
Command: show igmp_snooping group
VLAN Name
Multicast group: 224.0.0.2
MAC address
Reports
Port Member
VLAN Name
Multicast group: 224.0.0.9
MAC address
Reports
Port Member
VLAN Name
Multicast group: 234.5.6.7
MAC address
Reports
Port Member
Total Entries : 3
DGS-3224TGR:4#
show router_ports
Purpose Used to display the currently configured router ports on the switch.
Syntax show router_ports {vlan <vlan_name 32>} {static|dynamic}
This command will display the router ports currently configured on the switch.
Description
<vlan_name 32> − The name of the VLAN on which the router port resides.
Parameters
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically configued.
Restrictions None.
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
: default
: 01-00-5E-00-00-02
: 1
: 7
: default
: 01-00-5E-00-00-09
: 1
: 7
: default
: 01-00-5E-05-06-07
: 1
: 9
96