D-Link DGS-3224TGR Command Line Interface Reference Manual page 38

disable snmp traps
Purpose Used to disable SNMP trap support on the switch.
Syntax enable snmp traps
This command is used to disable SNMP trap support on the switch.
Description
None.
Parameters
Restrictions Only administrator-level users can issue this command.
Example Usage:
To prevent SNMP traps from being sent from the switch:
DGS-3224TGR:4#disable snmp traps
Command: disable snmp traps
Success.
DGS-3224TGR:4#
enable snmp authenticate traps
Used to enable SNMP authentication trap support.
Purpose
Syntax enable snmp authenticate traps
Description This command is used to enable SNMP authentication trap support on the switch.
Parameters None.
Only administrator-level users can issue this command.
Restrictions
Example Usage:
To turn on SNMP authentication trap support:
DGS-3224TGR:4#enable snmp authenticate traps
Command: enable snmp authenticate traps
Success.
DGS-3224TGR:4#
disable snmp authenticate traps
Purpose Used to disable SNMP authentication trap support.
Syntax disable snmp authenticate traps
This command is used to disable SNMP authentication support on the switch.
Description
Parameters None.
Restrictions Only administrator-level users can issue this command.
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
34