Vlan Commands - D-Link DES-3550 Command Line Interface Reference Manual

The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
create vlan
delete vlan
config vlan
config gvrp
enable gvrp
disable gvrp
show vlan
show gvrp
Each command is listed, in detail, in the following sections.
DES-3550 Layer 2 Fast Ethernet Switch
Parameters
<vlan_name 32> {tag <vlanid 1-4094> | advertisement}
<vlan_name 32>
<vlan_name 32> {[add [tagged | untagged | forbidden] | delete]
<portlist> | advertisement [enable | disable]}
[<portlist> | all] {state [enable | disable] | ingress_checking [enable
| disable] | acceptable_frame [tagged_only | admit_all] | pvid
<vlanid 1-4094>}
<vlan_name 32>
<portlist>
138
VLAN C
OMMANDS
15