D-Link DGS-3224TGR Command Line Interface Reference Manual page 103

DGS-3224TGR:4#create iproute 10.48.74.121/255.0.0.0 10.1.1.254 1
Command: create iproute 10.48.74.121/8 10.1.1.254 1
Success.
DGS-3224TGR:4#
delete iproute
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To delete a static address 10.48.75.121, mask 255.0.0.0 from the routing table:
DGS-3224TGR:4#delete iproute 10.48.74.121/255.0.0.0
Command: delete iproute 10.48.74.121/8
Success.
DGS-3224TGR:4#
show iproute
Purpose Used to display the switch's current IP routing table.
Syntax show iproute {<network_address>} {static|rip|ospf}
This command will display the switch's current IP routing table.
Description
<network_address> − IP address and netmask of the IP interface that is the destination of
Parameters
the route. You can specify the address and mask information using the traditional format (for
example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/16).
none.
Restrictions
Example Usage:
To display the contents of the IP routing table:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Used to delete an IP route entry from the switch's IP routing table.
delete iproute [default|<network_address>]
This command will delete an existing entry from the switch's IP routing table.
default − Deletes a default IP route entry.
<network_address> − IP address and netmask of the IP interface that is the destination of
the route. You can specify the address and mask information using the traditional format
(for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/16).
Only administrator-level users can issue this command.
99