D-Link DGS-3224TGR Command Line Interface Reference Manual page 138

disable ssl
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To disable the SSL v3 status on the switch:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
To disable the SSL function on the switch.
disable ssl [ciphersuite {RSA_with_RC4_128_MD5 |
RSA_with_3DES_EDE_CBC_SHA |
DHE_DSS_with_3DES_EDE_CBC_SHA |
RSA_EXPORT_with_RC4_40_MD5} | version {ssl_v3 | tls_v1} ]
This command will disable SSL on the switch and can be used to
disable any one or combination of listed ciphersuites on the switch.
ciphersuite - A security string that determines the exact
cryptographic parameters, specific encryption algorithms and key
sizes to be used for an authentication session. The user may choose
any combination of the following:
RSA_with_RC4_128_MD5 – This ciphersuite
combines the RSA key exchange, stream cipher
RC4 encryption with 128-bit keys and the MD5
Hash Algorithm.
RSA_with_3DES_EDE_CBC_SHA - This
ciphersuite combines the RSA key exchange, CBC
Block Cipher 3DES_EDE encryption and the SHA
Hash Algorithm.
DHE_DSS_with_3DES_EDE_CBC_SHA - This
ciphersuite combines the DSA Diffie Hellman key
exchange, CBC Block Cipher 3DES_EDE
encryption and SHA Hash Algorithm.
RSA_EXPORT_with_RC4_40_MD5 - This
ciphersuite combines the RSA Export key
exchange, stream cipher RC4 encryption with 40-
bit keys.
version - A version string that determines the exact version of SSL to
be used for the communication. The user may choose one or both of
the following:
ssl_v3
tls_v1
Only administrator-level users can issue this command.
134