D-Link DGS-3224TGR Command Line Interface Reference Manual page 26

logout
Used to log out a user from the switch's console.
Purpose
Syntax logout
Description This command terminates the current user's session on the switch's console.
Parameters None.
Restrictions None.
Example Usage:
To terminate the current user's console session:
DGS-3224TGR:4#logout
config realtime date
Purpose Used to configure the date and time on the switch.
Syntax config realtime date <date ddmthyyyy> <time hour:min:sec>
Description This command is used to set the date and time on the switch.
<date ddmthyyyy> − Use this format for setting the date.
Parameters
<time hour:min:sec> − Use this format for setting the time.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To configure the date:
DGS-3224TGR:4#config realtime date 23sep2003 10:59:30
Command: config realtime date 23sep2003 10:59:30
Success.
DGS-3224TGR:4#
show realtime
Purpose Used to display the date and time on the switch.
Syntax show realtime
Description This command is used to display the date and time on the switch.
None.
Parameters
None.
Restrictions
Example Usage:
To display the date:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
22