D-Link DGS-3224TGR Command Line Interface Reference Manual page 158

show authentication server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the authentication server group:
DGS-3224TGR:4#show authentication server_group
Command: show authentication server_group
Group: tacacs
This group has no entry!
Group: xtacacs
This group has no entry!
Group: tacacs+
This group has no entry!
Group: default
This group has no entry!
DGS-3224TGR:4#
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Used to view authentication server groups on the Switch.
show authentication server_group <string 15>
This command will display authentication server groups currently
configured on the Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to view.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
None.
IP Address
----------------------------
IP Address
----------------------------
IP Address
----------------------------
IP Address
----------------------------
Protocol
--------------------
Protocol
--------------------
Protocol
--------------------
Protocol
--------------------
154