D-Link DGS-3224TGR Command Line Interface Reference Manual page 37

show trusted_host
Used to display a list of trusted hosts entered on the switch using the create trusted_host
Purpose
command above.
Syntax show trusted_host
Description This command is used to display a list of trusted hosts entered on the switch using the create
trusted_host command above.
Parameters None.
None.
Restrictions
Example Usage:
To display the list of trust hosts:
enable snmp traps
Purpose Used to enable SNMP trap support.
Syntax enable snmp traps
Description This command is used to enable SNMP trap support on the switch.
None.
Parameters
Only administrator-level users can issue this command.
Restrictions
Example Usage:
To turn on SNMP trap support:
DGS-3224TGR:4#enable snmp traps
Command: enable snmp traps
Success.
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
DGS-3224TGR:4#show trusted_host
Command: show trusted_host
Management Stations
IP Address
----------------------
Total Entries : 0
DGS-3224TGR:4#
33