D-Link DGS-3224TGR Command Line Interface Reference Manual page 132

config ssh user
Used to configure the SSH user.
Purpose
Syntax config ssh user <username> authmode [Publickey |Password|Hostbased [host_name
<domain_name 32>|hostname_IP <domain_name 32> <ipaddr>]]
This command allows you to modify the parameters of the SSH user.
Description
<username> – Enter an optional SSH user name.
Parameters
authmode – Select the type of security authentication mode: [Publickey |Password
|Hostbased [host_name <domain_ name 32>|hostname_IP <domain_name 32> <ipaddr>]].
Restrictions Only administrator-level users can issue this command.
Usage Example:
To configure the SSH user:
DGS-3224TGR:4#config ssh user Sibyl authmode Hostbased hostname_IP 172.18.211.200
Command: config ssh user Sibyl authmode Hostbased hostname_IP 172.18.211.200
Success.
DGS-3224TGR:4#
show ssh user
Used to display the SSH user setting.
Purpose
Syntax show ssh user
Description This command allows you to display the current SSH user setting.
None.
Parameters
None.
Restrictions
Usage Example:
To display the SSH user:
DGS-3224TGR:4#show ssh user
Command: show ssh user
Account is empty!
DGS-3224TGR:4#
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
128