D-Link DGS-3224TGR Command Line Interface Reference Manual page 118

DGS-3224TGR:4# show radius acct_client
Command: show radius acct_client
radiusAcctClient ==>
radiusAcctClientInvalidServerAddresses 0
radiusAcctClientIdentifier
radiusAuthServerEntry ==>
radiusAccServerIndex : 1
radiusAccServerAddress
radiusAccClientServerPortNumber
radiusAccClientRoundTripTime
radiusAccClientRequests
radiusAccClientRetransmissions
radiusAccClientResponses
radiusAccClientMalformedResponses
radiusAccClientBadAuthenticators
radiusAccClientPendingRequests
radiusAccClientTimeouts
radiusAccClientUnknownTypes
radiusAccClientPacketsDropped
CTRL+C ESC q
config 802.1x auth_mode
Used to configure 802.1x authentication mode.
Purpose
Syntax config 802.1x auth_mode [port_based|mac_based]
Description The config 802.1x auth_mode command configures the authentication mode.
port_based – Configure the authentication as port-based mode.
Parameters
mac_based – Configure the authentication as MAC-based mode.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To configure the authentication mode:
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
Quit SPACE n
DGS-3224TGR:4# config 802.1x auth_mode mac_based
Command: config 802.1x auth_mode mac_based
Success.
DGS-3224TGR:4#
D-Link
0.0.0.0
0
0
0
0
0
0
0
0
0
0
0
Next Page p Previous Page
114
r Refresh