Option (Machine Settings Mode) - Canon iR5055 Series Service Manual
Hide thumbs
Also See for iR5055 Series:
- User manual (98 pages) ,
- Easy operation manual (60 pages) ,
- Service manual (596 pages)
Table of Contents
Advertisement
Sub-item
Description
CL-ON
Use it to start the operation of the clutch.
Procedure
1) Press CL-on and then the OK key to start the operation of the clutch.
2) Press the OK key once again to stop the operation. (The operation will stop automatically in about 2 sec; however, the indication
will not change to 'STOP' unless you press the OK key.)
FAN-CHK
Use it to check the ADF cooling fan on its own.
Procedure
1) Press FAN-CHK to highlight.
2) Type in the fan number using the keypad.
3) Press the OK key.
4) Press FAN -on to check the operation.
Fan Number
0, 1: cooling fan
Adjustment range: 0 to 2
FAN-ON
Use it to start fan operation.
Procedure
1) Press FN-on and then the OK key to start the operation of the fan.
2) Press the OK key to stop the operation.
(The fan will stop automatically in about 5 sec; however, the indication will not be 'STOP' unless the OK key is pressed.)
SL-CHK
Use it to check the ADF solenoid on its own.
Procedure
1) Press SL-CHK to highlight.
2) Type in the solenoid number using the keypad.
3) Press the OK key.
4) Press SL-on to check the operation.
Solenoid Number
0: locking solenoid
1: stamp solenoid
SL-ON
Use it to start the operation of the solenoid.
Procedure
1) Press SL to highlight and then the OK key to start the operation of the motor.
2) Press the OK key once again to stop the operation.
(The operation will stop automatically in about 5 sec; however, the indication will not be 'STOP' unless the OK key is pressed once
again.)
MTR-ON
Use it to start the operation of the motor.
Procedure
1) Press MTR-on to highlight and then the OK key to start the operation of the motor.
2) Press the OK key once again to stop the operation.
(The operation will stop automatically in about 5 sec; however, the indication will not be 'STOP' unless the OK key is pressed.)
ROLL-CLN
ADF Roller Cleaning Mode
Execute the mode so that the motor will rotate the roller. Force lint-free paper moistened with alcohol against the roller to clean it.
Procedure
1) Press ROLL-CLN to highlight.
2) While the roller is rotating, force lint-free paper moistened with alcohol against the roller to clean.
3) Select ROLL-CLN to highlight and press the OK key so that the roller will stop.
FEED-ON
Use it to check the movement of paper in the ADF on its own.
Procedure
1) Press FEED-on and then the OK key so that paper movement will start according to the operation mode selected using FEED-
CHK.
17.6 OPTION (Machine Settings Mode)
17.6.1 COPIER
17.6.1.1 COPIER List
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
<BODY>
Sub-item
Description
PO-CNT
Use it to turn on and off the potential control mechanisms.
setting: 0: off; 1: on (default)
COPIER > FEEDER > FUNCTION
T-17-51
COPIER > OPTION > BODY
Chapter 17
Level
1
1
1
1
1
1
1
1
0015-6258
Level
1
17-37
- Quick Links:
- Error Code Table
- Error Code Details
Hide quick links:
Advertisement
Chapters
Table of Contents
