Before Installation - Omron NB Series Operation Manual

2 Installation and Startup of NB-Designer
2-1

Before Installation

The system environment to run the NB-Designer is as follows.
System Configuration
Items
Operating System (OS)
CPU
Memory
Hard Disk
Display
RS-232C COM Port
USB Port
CD-ROM Drive
Please pay attention to the following items when using Windows Vista/7.
(a) You must log in Vista/Win7 operating systems as the administrator.
(b) When running the NB-Designer, right-click the mouse on the icon "NB-Designer.exe" and select
"Windows XP (Service Pack 2)" in "Compatibility" tab.
(c) When running the NB-Designer for the first time, right-click the mouse on the icon "NB-
Designer.exe" and check "Run this program as an administrator". And then, run the software
directly.
2-2
Minimum Configurations
Microsoft Windows XP (SP1 or higher)
Microsoft Windows Vista (32-bit or 64-bit edition)
Microsoft Windows 7 (32-bit or 64-bit edition)
Intel Pentium II or higher
512 MB or more
2.5 GB or more, with the disk space more than 100 MB at least
Supports the display with resolution of 800×600 and 16-bit high color
(1024×768 and 32-bit true color are recommended.) .
At least one port is kept for the serial communication used by the
touch panel.
USB 1.1 or higher
4x or higher
NB-series Programmable Terminals NB-Designer Operation Manual(V106)