Omron NB Series Operation Manual page 328

3 Functions of NB-Designer
When LB9163 is ON, the display is flipped; while LB9163 is OFF, the display is normal. Perform the
3
offline simulation and the effect is as shown below:
Public Window Attributes: Determines the common window for the project program to be displayed
above or below the Basic Window.
Pop-up Window Attributes: Sets the pop-up window to normal display (For example: The opened
window must always be displayed on the top layer, but it can be switched to the top layer of the other
windows.) or always display on the top layer.
Initial Window: The Window No. will be firstly displayed when the HMI Application Mode is entered
after the unit starts. The default is Frame 0.
Public Window: Refers to the No. of Common Window of the project. The default is Frame 1.
Fast Selection Window: Refers to the No. of Fast Selection Window of the project. The default is
Frame 2.
File Browser Window: Refers to the No. of Browser File Window of the project. The default is Frame 5.
Operation Confirmation Window: Refers to the No. of Operation Confirmation Window of the project.
The default is Frame 7.
Login Window: Refer to the No. of Login Window of the project. The default is Frame 9.
Invalided Components Color:
The role of invalid component marks: When the enable condition isn't met or is invalid, using this option
can set invalid component mark to indicate this component can't be used currently and the touch is not
effective. Only the control components such as switch and Multiple State Setting component etc. can
use invalid component marks, and the display components such as Lamp and Multiple State Display
component etc. don't support the invalid component marks.
NB-series Programmable Terminals NB-Designer Operation Manual(V106) 3-287