Installation/Uninstallation; Installation Procedure; Uninstallation Procedure - Omron NB Series Operation Manual

2-2

Installation/Uninstallation

2-2-1

Installation Procedure

1
Start Windows XP/Windows Vista/Windows 7.
2
Insert the NB-Designer software into the computer.
The installation program starts automatically.
If the installation program doesn't start automatically, double click [Setup.exe] to perform the
installation.
3
Select the installation language in the [Choose Installation Language] window, and click NEXT.
4
Click the [Next] button again to display the [Select the Destination Location] dialog box.
5
After selecting the default installation location [C:\Program Files\OMRON\NB-Designer_V .
click the [Next] button.
6
To select any installation location, click [Browse]. After the selectable directory appears, select
any one of directory available to install the NB-Designer. Click the [Next] button after clicking the
[OK] button.
7
After [Ready to Install This Program] dialog box appears, click the [Install] button to start the
installation.
8
After [Successfully Installed] dialog box appears, click the [Finish] button to complete the
installation.
Note For download the application programs, please access your local OMRON website. If local site cannot be
found, please access OMRON IA global site "http://www.ia.omron.com/" at first and select the area where
you are.
2-2-2

Uninstallation Procedure

Click [Start]-[All Programs]-[OMRON]-[NB-Designer_enu]-[Uninstall].
Note When using new-version software to update a project created with software of an old version, please
properly backup the project before update.
Precautions for Correct Use Precautions for Correct Use
The update, restoration, uninstall and reinstallation of software in running status is prohibited in
order to guarantee the correct use of the product.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
2 Installation and Startup of NB-Designer
2
_ENU],
2-3