Text Display - Omron NB Series Operation Manual

3 Functions of NB-Designer

3-6-13 Text Display

The Text Display component can display data in the specified word register, which is
analyzed through the standard ASCII character table. Low-byte character codes are displayed on the
left, while high-byte character codes are displayed on the right.
Process of adding one Text Display component
1
Press the Text Display component icon, drag it to the window, then the [Basic Attributes] dialog
box of the Text Display component will pop up.
High byte and low byte swaps: Refers to the interchange of the high-bit and the low-bit for the
Unicode: Support multiple languages display.
Extended Ascii: Checking this option can display the extended ASCII characters between
Read Address: Refers to word address register of PLC to be displayed (It contains up to 16
3-126
same byte, as shown below.
Not use [High byte and
abcd
low byte swaps]
Use [High byte and low
badc
byte swaps]
0×80 and 0×ff in the ASCII codes. When it is checked, Chinese can't be
displayed in the Text Input component, Text Display component and Note
Book component. This option is mutually exclusive the Unicode.
words, each of which contains 2 ASCII codes).
NB-series Programmable Terminals NB-Designer Operation Manual(V106)