Moving Component - Omron NB Series Operation Manual

3-6-8

Moving Component

Moving Component can be used to put one vector graphics or bitmap into the position
specified by PLC in the HMI. The state and absolute position are provided by the 3 consecutive
registers in PLC. Generally speaking, the 1
register controls the horizontal coordinate (X), and the 3
Process of adding one Moving Component
1
Press the Moving Component icon, drag it to the window, then the [Basic Attributes] dialog box
of the Moving Component will pop up.
Read Address: Controls the first address of the word address controlling the displayed
Address: Refers to the first address of the word address corresponding to the Moving
Word Length: Displays the data length of the read address, which is fixed to "3".
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
st
information (such as the state, graphics, tag and so on) of the Moving
Component in PLC.
Component.
3 Functions of NB-Designer
register controls the state of the component, the 2
register controls the vertical coordinate (Y).
rd
nd
3
3-107