4 Functions of NBManager
4-4
System Operate
Section Switching:
Switch to User Program State: The destination HMI switches to the User Project Mode.
Switch to Set Program State: The destination HMI switches to the System Setting Mode.
Update Operation Section:
Perform the updates of Kernel and root file system. Turn the dip switches locating at the backside of NB
Unit to ON (SW1) and to OFF (SW2) respectively before the update.
Note After the updates made to the kernel and root file system, the NB Unit will return to the factory settings,
therefore be careful when perform this operation.
4-14
NB-Series Programmable Terminals NB-Designer Operation Manual(V106)