Function Key - Omron NB Series Operation Manual

3 Functions of NB-Designer
3-7-2

Function Key

Function Key provides functions such as "Switch Window", "Keyboard Function", "Execute
Macro", "Touch Calibration", "Clear Event" and "Message Board" etc. The function key is not controlled
by the register address, so the execution of specified function needs to be activated by touching this
component.
Process of adding one Function Key
1
Drag the Function Key icon after it is pressed, and then go to the [Function Key] tab with
"Switch Window", "Keyboard Function", "Execute Macro", "Touch Calibration", "Clear Event",
"Message Board" and "Print" available after the [Function Key Component Attribute] dialog box
pops up.
2
Go to the [Tag] tab and fill in the text to be displayed.
3
Go to the [Graphics] tab and select the Vector Graphics or Bitmap to display the state.
4
Go to the [Control Setting] tab and make the Security Setting and set the Notifications.
5
Press the [OK] button to adjust the position and size of the Function Key.
3-194 NB-series Programmable Terminals NB-Designer Operation Manual(V106)