Multiple State Switch - Omron NB Series Operation Manual

3 Functions of NB-Designer
3-6-6

Multiple State Switch

Multiple State Switch is the combination of the Multiple State Display component and the
Multiple State Setting component. It can display the mapping state according to the value of the
specified word address (The mapping state is up to 256 kinds.); and it also defines a touching area at
the same time. When this area is touched, the mapping data of the corresponding state will be written
into the specified word address. Write address can be same or not same as the read address.
Process of adding one Multiple State Switch component
1
Drag the Multiple State Switch icon after it is pressed will make the [Basic Attributes] of Multiple
State Switch component pop up.
2
Switch to the [Multi-State Switch] tab and set the State Num. and the value corresponding to
each state for the component. You can set the state from 1 to 256 in the dropdown box
corresponding to "State Num.".
3-94 NB-series Programmable Terminals NB-Designer Operation Manual(V106)