Nb-Designer Function List - Omron NB Series Operation Manual

A-2

NB-Designer Function List

PLC Parts Bit State Setting
Bit State Lamp
Bit State Switch
Multiple State
Setting
Multiple State
Display
Multiple State
Switch
XY Plot
Moving
Component
Animation
Number Input
Number Display
Text Input
Text Display
Bar Picture
Meter
Indirect Window
Direct Window
Alarm Display
Trend Curve
Recipe
Oscillograph
Scroll Bar
Event Display
NB-Series Programmable Terminals NB-Designer Operation Manual(V106)
Items
It defines a touching area, and the bit address can be forced to ON/OFF
when this area is enabled.
Indicates the ON/OFF state of one bit address.
It defines a touching area, and the bit address can be switched to ON/OFF
when this area is enabled.
It defines a touching area, and the state number can be written into the
specified word address when this area is enabled.
Used to show the map state according to the value of the specified word
address.
Used to show the map state according to the value of the specified word
address and it also defines a touching area at the same time.
XY Plot reflects the correlation of two variables visually.
Used to place one vector graphics or bitmap in the screen position specified
by the PLC.
Used to put the component into the position with the specified track in the
HMI, and this position is determined by the preset path and the data of PLC.
Used to display the current data in word address, to input data through the
pop-up keyboard and to change the data in this address by pressing
"ENTER" button.
Used to display the data in the specified register.
Used to modify or display the data in the specified word register, which is
analyzed through the standard ASCII character table. The input data is saved
to a consecutive register with the "Read Address" as the first address.
Used to display the data in the specified word register, which is analyzed
through the standard ASCII character table.
Used to display PLC register data in a bar chart percentage style according
to the set maximum and minimum values.
Used to display the data in the word register by means of a meter diagram.
Used to make an already window pop up on the current screen.
Used to make the specified window pop up on the current screen.
Used to display all the triggered alarm information in the set area. The
content displayed by the Alarm Display is the same as that displayed by the
Alarm Bar, and both of them are about the alarm information of a certain
node switch (bit address).
Used to obtain the PLC data periodically and display them in trend curve.
The background communication still continues to do when the current
window where the Trend Curve locates is closed, the sampling information
before the switching can be obtained when the Trend Curve is switched to at
any time.
Used to transfer the data from the recipe memory card (in the USB memory)
of HMI to PLC or vice versa.
The Oscillograph functions similarly to the Trend Curve. But the data
sampling of the Oscillograph is valid only in the current page, which means
the Oscillograph data will not be read but be lost each time when the page is
switched, and the data sampling will start from the beginning when the
Oscillograph window is switched to.
Used to change the value in the specified word register by pressing the
slider.
Used to make the event information logged in "Event Information" and
meeting the current triggering conditions displayed.
Descriptions of Function
Appendices
A-7