Direct Window - Omron NB Series Operation Manual

3-6-17 Direct Window

Direct Window can make a specified window pop up onto the current screen. The popup
window will be displayed outside the boundary of the [Direct Window]. Normally, the Direct Window size
should be set to same as that of the popup windows. There is no absolute limitation on the number of
Direct Window. However, a maximum of 16 Direct Windows can be displayed simultaneously during
operation. The closing or opening of the Direct Window is only determined by the bit address of the
[Read Address] that control it, while Function Key can't be used to close it. When this bit address is ON,
the window will pop up, and when it is OFF, the window will be closed.
Process of adding one Direct Window component
1
Press the Direct Window component icon, drag it to the window, then the [Basic Attributes]
dialog box of the Direct Window component will pop up.
Read Address: When the specified read address is ON, the content of the specified window
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Bit state switch,
read/write address
is LB11
Press this button, set
all the bit of read/wirte
address memery to '1',
and popup window 20
will be displayed in the Direct Window component area.
3 Functions of NB-Designer

Direct window,

read address is
LB11, windows
No. is 20
window 20
3
3-145