Bit State Neon Lamp - Omron NB Series Operation Manual

3
Switch to the [Tag] tab and add the text corresponding to the state.
4
Switch to the [Graphics] tab and select the vector graphics or bitmap representing the touching
area and touching state.
5
Press the [OK] button to complete the setup of the Multiple State Neon Lamp component.

3-6-26 Bit State Neon Lamp

The Bit State Neon Lamp component displays the tag contents in loopy-moving way by the
neon lamp, and it supports the tag contents corresponding to State 0 and State 1 in the loopy-moving
way.
The difference of the Multiple State Neon Lamp and the Bit State Neon Lamp is the controlling method,
and the former selects the different states ranging from 1 to 256 by changing the register value, while
the latter changes the display state (only 2 states available) by changing the state of the control bit.
Process of adding one Bit State Neon Lamp component
1
Press the Bit State Neon Lamp component icon, drag it to the window, then the [Basic
Attributes] of Bit State Neon Lamp component will pop up.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3 Functions of NB-Designer
3
3-183