Text Input - Omron NB Series Operation Manual

3-6-12 Text Input

Text Input component can modify or display the data in the specified word register, which is
analyzed through the standard ASCII character table. The input data is saved to a consecutive register
with the "Read Address" as the first address. Low-byte character codes are displayed on the left, while
high-byte character codes are displayed on the right.
Enable the touching area and enter
Input from the keyboard
Process of adding one Text Input component
1
Press the Text Input component icon, drag it to the window, then the [Basic Attributes] dialog
box of the Text Input component will pop up.
Read/Write Address: Refers to the word address register (It contains up to 16 words, each of which
Address: Refers to the first address of the word address corresponding to the Text Input
component.
Word Length: 1~16 are available for the Read/Write Address.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
the input state
contains 2 ASCII characters) displayed and modified by Text Input component
in PLC.
3 Functions of NB-Designer
3
3-123