Window Attribute - Omron NB Series Operation Manual

3 Functions of NB-Designer
3-4-2

Window Attribute

The methods to change the window attribute:
(1) Directly double-click the blank in the window.
(2) Click the
Window Name
Assign the unique name for each window for convenient differentiation. Of course, the window name
can be changed.
Window No.
The valid window No. ranges from 0 to 32767. Window No. is assigned by the system when the new
window is created, and it can't be changed by the user. Due to the deletion or addition of the window,
so the window No. can be inconsecutive.
Position
When the window is the window ejected by using "Pop-up Window" function of the function key, the
vertex in the upper-left of the window will be displayed in this position.
Width and Height
Width and height can be set for the pop-up window, and if it is the Basic Window, it must be set to
the default size (i.e. the size of the full screen).
Special Attribute
Keyboard page determines whether to set the window as Keyboard Window. Print page can be used
to set the size of this window regardless of the limitation of the actual resolution of the HMI. Print
page and video page are not supported currently.
Shielding public window keyboard mapping
Switching to the lowest security level when window closed
If the security level is set for one window to realize the function, i.e. the password will be cleared
automatically when the window is closed, and the password needs to be input again when the
window is entered again, the security level will become 0 only if the window is closed.
3-48
icon in the toolbar without selecting any component in the window.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)