Omron NB Series Operation Manual page 52

(12)Performing cut, copy, paste and deletion
(13)Performing the multi-copy operation
You can use [Undo/Redo] function to add any one component to the screen or make any
modification to the screen. Add a switch component to the screen, as shown below.
Press [Undo].
Then press [Redo].
Note The software only supports single-step "Undo/Redo" operation.
Cut, Copy, Paste and Delete
After selecting one component or more, you can cut, copy, paste it or them etc, and the
corresponding icons are shown as
Nudge
The component position can be adjusted by "Nudge" method after it is selected. The component
movement can be realized by using direction key or the corresponding [Nudge] icons. Each time the
"Nudge" button is pressed, the component will move a pixel distance accordingly. The corresponding
icons are shown as
to-one with the contents of [Nudge] in the [Edit] menu. The simple nudge method is to use the arrow
keys on the keyboard, which realizes the easy component movement.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3 Functions of NB-Designer
.
and they are "Left", "Right", "Up", "Down" corresponding one-
3
3-11