Omron NB Series Operation Manual page 136

Functions of Multiple State Switch:
Control Mode
Add
Sub
List
Dropdown List
For the control modes of Add and Sub, [Unloop] is not checked by default.
State Num.: 256 kinds of states (max.) can be set (256 states (max.) and 17 states (max.) can be
displayed when the BIN/BCD codes and the LSB codes are used respectively.).
The line spacing for the list and the dropdown list can be set:
Map Value: When the value read by the read address is equal to a certain value in the Map Value, the
Multiple State Control component will display the tag and the graphics corresponding to the state
number of this value. When a certain state number is switched to, the value corresponding to this value
will be written into the write address.
3
Switch to the [Tag] tab and add the text corresponding to the state.
4
Switch to [Graphics] tab, and select vector graphics or bitmap to display the register state and
represent the touching area.
5
Switch to the [Control Setting] tab and make the Security Setting and set the Notifications.
6
Press the [OK] button to complete the setup of the Multiple State Switch component.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Each time this component is pressed, 1 will be added to the state number, and the map
value of the corresponding state will be written into the specified write address, and the
graphics corresponding to the state will be displayed according to the specified read
address at the same time.
Unloop: When it is checked, and the value of the register for write address is equal to the
value mapped by the set maximum state number, the component doesn't act when
the switch is pressed again. When it isn't checked and the value of the register of
write address is equal to the value mapped by the set maximum state number, the
value of the register for write address is equal to the value mapped by the
minimum state number.
Each time this component is pressed, 1 will be subtracted from the state number, and the
map value of the corresponding state will be written into the specified write address, and
the graphics corresponding to the state will be displayed according to the specified read
address at the same time.
Unloop: When it is checked, and the value of the register for write address is equal to the
value mapped by the minimum state number, the component doesn't act when the
switch is pressed again. When it isn't checked and the value of the register of write
address is equal to the value mapped by the minimum state number, the value of
the register for write address is equal to the value mapped by the set maximum
state number.
All the set states will be displayed in the list form, and the current state is differentiated by
the specified color.
All the set states will be displayed in the dropdown list form, and the current state is
differentiated by the specified color and the first information displayed in the dropdown list
represents the current state.
3 Functions of NB-Designer
Descriptions
3
3-95