Decompile Operate - Omron NB Series Operation Manual

4 Functions of NBManager
4-6

Decompile Operate

Decompile Operation:
1
Select one .pkg file.
2
Set the directory of "Decompile Destination Project Folder".
3
Click the [Decompile] button and input the decompile password, then click the OK button.
Finally, "Uncompile success!" dialog box will pop up.
The prerequisite for the decompile operation is "Allow Decompilation" is checked and the pass-
word is set in the [HMI Extended Attributes] tab during the project creation. The default decom-
pilation password is 888888.
4-16 NB-Series Programmable Terminals NB-Designer Operation Manual(V106)