Basic Design Method; Designing Components - Omron NB Series Operation Manual

3 Functions of NB-Designer
3-5

Basic Design Method

3-5-1

Designing Components

Generally speaking, one window includes various kinds of components such as switches, lamps,
number input and graphics. It is simple to add one component to the window, and it is basically divided
into 3 procedures as shown below.
Component Addition
1
Drag the component icon from [Graph Element Window]-[PLC Parts] to the HMI Edit Window.
2
When the attribute dialog box of this component appears, set the various attributes for this
component such as PLC Read/Write Address, Vector Graphics or Bitmap, Tag and Position
etc.
3
After the various attributes of this component are set, click the [OK] button. And you can see
this component has been placed in the screen after exiting from this dialog box. If required, you
can adjust the size of the component by changing settings in "Position" in "Display Setting" tab
or drag it to the desired position.
3-54 NB-series Programmable Terminals NB-Designer Operation Manual(V106)