Display Setting Of Component - Omron NB Series Operation Manual

3 Functions of NB-Designer
Perform the offline simulation. And when no data is written into the number input component LW0,
LB10 is "Off", as shown in the following left graphics.
When the data is written into the number input component, LB10 is "On", as shown in the following
right graphics.

3-5-12 Display Setting of Component

Lock
X/Y
Width/Height
Always Display
Never Display
[Touching is invalid]
Conditional Display
3-78
Display Setting for Component
Checking this option means the component is locked. Once the component is locked, it can't be
moved by the mouse or the moving keys in the keyboard.
Refers to the coordinate value of the vertex in the upper-left of the component.
Refers to the width and height of the component (The unit is pixel point).
Checking this option means the current component is always in displayed state.
Checking this option means the current component is always in "hide state" and the touching is
invalid when the component is hidden.
Security Level Control: Checking this option means the current component can be displayed
only when the security user level of the operator is higher than the minimum security level
already set.
User Permission Control: Checking this option means the current component can be displayed
only when the operator has the set permission.
Register Control: Checking this option means the current component can be displayed only
when the state of the specified bit register or word register meets the set conditions.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)