Bit State Switch - Omron NB Series Operation Manual

3 Functions of NB-Designer
5
Switch to the [Display Setting] tab and adjust the position and size of the lamp component.
6
Press the [OK] button to complete the setup of the lamp component.
3-6-3

Bit State Switch

Bit State Switch is the combination of the Bit State Lamp and the Bit State Setting component.
It defines a touching area, and the bit address inside the HMI or of the PLC can be switched between
On and Off state when this area is enabled.
Process of adding one Bit State Switch
1
Drag the Bit State Switch icon after it is pressed, then the [Basic Attributes] dialog box of Bit
State Switch component will pop up.
3-86 NB-series Programmable Terminals NB-Designer Operation Manual(V106)