Omron NB Series Operation Manual page 250

Periodical
JOG++(circle)
Periodical
JOG--(one-way)
Periodical
JOG++(one-way)
Periodical Bounce
(turnover upon limit)
Step up (circle)
Step down (circle)
Set const value
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Mode
This mode makes the address value of the register for the specified word
increase automatically by the "increment" at the interval of each "Execution
Cycle" and makes it increase from 0 again when "the upper limit value" is
reached.
T
0
This mode makes the address value of the register for the specified word
decrease automatically by the "decrement" at the interval of each "Execution
Cycle" and makes it stop at the lower limit value after "the lower limit value" is
reached.
T
Upper
This mode makes the address value of the register for the specified word
increase automatically by the "increment" at the interval of each "Execution
Cycle" and makes it stop at the upper limit value after "the upper limit value"
is reached.
T
0
This mode makes the address value of the register for the specified word
increase automatically by the "step" at the interval of each "Execution Cycle"
until to "the upper limit value", and then makes it decrease by the "step" at
the interval of "Execution Cycle" until to 0, and later makes it increase again,
thus making the cycle repeated again and again.
Lower
YES NO
Lower
This mode makes the address value of the register for the specified word
increase automatically by the "step" at the interval of each "Execution Cycle"
until to "the upper limit value", and makes it increase again after being reset
to "the lower limit value".
T
Lower
This mode makes the address value of the register for the specified word
decrease automatically by the "step" at the interval of each "Execution Cycle"
until to "the lower limit value", and makes it decrease again after being reset
to "the upper limit value".
T
Upper
The preset constant value will be written to the address of the register for the
specified word after the "Execution Cycle" is reached.
3 Functions of NB-Designer
Descriptions
Upper
V+K
NO YES
V-K Lower
NO
Upper
V+K
NO
T
V+K Upper
YES
NO
V-K
V+K Upper
NO YES
Lower
V-K
YES
NO
3
3-209