Descriptions Of Other Functions Of Nb-Designer - Omron NB Series Operation Manual

3-16 Descriptions of Other Functions of
NB-Designer
1
Changeable text color, window color and the filled color of rectangle
The color can be changed by directly pressing the line.
2
Enhanced component editing function
For the Copy and Paste operations, the copied component will be placed in the position which
deviates 15-coordinate from the original position towards the lower right position in the same
screen, while it will be placed in the position with the same coordinate as the original
component in the different screen.
For the modification of "Alignment", "Width" (same width) and "Both" (same size), the specific
operation process is as follows: Select one component as the reference, then perform
"Alignment", "Width" and "Both" operations. (If you use the "Shift" key to select, then the
component firstly selected should be as the reference, while the component at the upper left
should be used as the reference during the selection made by dragging the mouse. The
selected mark for the reference is indicated by the solid rectangle, while the selected mark for
the other components is indicated by the hollow rectangle.)
3
Proportionally zoom multiple components simultaneously
When the multiple components in the editing screen are selected together, one proportional
outline box will appear, and the user can zoom it freely by dragging the mouse to adjust all the
selected components to the required sizes simultaneously.
As shown above, the default border color is pink.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3 Functions of NB-Designer
3
3-347