Omron NB Series Operation Manual page 123

3 Functions of NB-Designer
Type
Reset
Set On when Window Open
Set Off when Window Open
Set On when Window Close
Set Off when Window Close
Set On when Window Maximized
Set Off when Window Maximized
Set On when Window Minimized
Set Off when Window Minimized
Set On when Backlight Off
Set Off when Backlight Off
Set On when Input Success
Set Off when Input Success
3
Switch to the [Tag] and add the text corresponding to the state.
4
Switch to [Graphics] tab and select the vector graphics or bitmap representing the touching
area and touching state.
5
Switch to the [Control Setting] tab and make the Security Setting and set the Notifications.
Min Time Interval (seconds): Refers to the interval between 2 valid touching operations for the same
component, and the default is 0 s.
6
Switch to the [Display Setting] tab and adjust the position and size for the Bit State Setting
component.
7
Press the [OK] button to complete the setup of Bit State Setting component.
3-82
The specified bit address will turn On only when the Bit State Setting
component is being pressed. Similarly, the bit address will turn Off when the
component is released.
The specified bit address will turn On when the window containing the Bit
State Setting component is opened.
The specified bit address will turn Off when the window containing the Bit
State Setting component is opened.
The specified bit address will turn On when the window containing the Bit
State Setting component is closed.
The specified bit address will turn Off when the window containing the Bit
State Setting component is closed.
The specified bit address will turn On when the window containing the Bit
State Setting component is maximized.
The specified bit address will turn Off when the window containing the Bit
State Setting component is maximized.
The specified bit address will turn On when the window containing the Bit
State Setting component is minimized.
The specified bit address will turn Off when the window containing the Bit
State Setting component is minimized.
The specified bit address will turn On when the window containing the Bit
State Setting component is displayed in the screen and the backlight is Off.
The specified bit address will turn Off when the window containing the Bit
State Setting component is displayed in the screen and the backlight is Off.
The specified bit address will turn On when the input using one Number Input
component in the window containing the Bit State Setting component is
successful.
The specified bit address will turn Off when the input using one Number Input
component in the window containing the Bit State Setting component is
successful.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Descriptions