The combined use of Note Pad with Function Keys
After the Note Pad is placed well, you can set the Tool, Pen Color, Pen Width and Clear after the
[Message Board] is selected in the Function Key tab, as shown below.
(a) Tool
Pen: After selecting the pen, you can leave messages or make drawings in the message board.
Eraser: Clears the contents in the message board.
Clear Block: Clears the contents in the selected area of the massage board.
(b) Pen Color: Sets the pen color, as shown below.
(c) Pen Width: Sets the thickness of pen from the available 1 (the thinnest) to 8 (the thickest), as
shown below.
(d) Clear: Clears the contents in the whole message board.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3 Functions of NB-Designer
3
3-213