3-10-4 HMI System Information Text
The default system prompt information in English can be changed to the required text.
Enter the [HMI System Information Text] tab in HMI Attribute, select the [Use User-Defined System
Information] option to input the corresponding text in the text box. This text supports Vector Font and
Dot Matrix Font, as shown above.
Example: Change "PLC No Response" to "No Response".
(1) Enter the [HMI System Information Text] tab in HMI Attribute.
(2) Select "2: PLC No Response" in the drop-down box of the system information, and check
the [Use User-Defined System Information] option and input "No Response" in the text input
box.
(3) Use the Vector Font with the following settings, i.e. AR PL UMing CN, the size of 16, red
and Bold.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3 Functions of NB-Designer
3
3-289