3-6-2
Bit State Lamp
Bit State Lamp displays the On/Off state of bit address inside a specified HMI or of PLC
device. If the state is 0, the graphics with state of 0 will be displayed; If the state is 1, the graphics with
state of 1 will be displayed. If "Use Tag" is checked, the tag values corresponding to the different states
can be set and displayed.
Process of adding one Bit State Lamp
1
Drag the Bit State Lamp icon after it is pressed, then the [Basic Attributes] dialog box for Bit
State Lamp component will pop up.
Read Address: Refers to the bit address controlling the displayed information (such as the state,
graphics, tag and so on) of the lamp.
Address: Refers to the bit address corresponding to the lamp.
2
Switch to the [Bit State Lamp] tab.
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3 Functions of NB-Designer
3
3-83