6 Descriptions of New Functions Added into NB
6-1-6
NBManager
Network Interface Communication Method
In the [NBManager] dialog box, click the [Set] button in the [Communication Set] option, and then
check the [Network] in Communication Type option in the Communication Set dialog box with the
various parameters same as that of HMI Unit. At the same time, set the IP address of PC to the
same network segment as that for HMI Unit, as shown below:
Set IP/PORT and Get HMI IP/PORT information
In the [NBManager] dialog box, click the [System Operate].
Get HMI IP/PORT information
Set IP/PORT
6-6
-TW01B
Gets the information on current IP address and port number of HMI.
Makes the current IP address and port number of HMI changed to the
set IP address and PORT number. (IP/PORT can be updated only
when the connection is realized via USB port or serial port.)
NB-Series Programmable Terminals NB-Designer Operation Manual(V106)